RC Gold™
Perfect Dental (Shenzhen Perfect Medical Instruments)
RC Gold™
Perfect Dental (Shenzhen Perfect Medical Instruments)
Three-instrument reciprocating set (R25 25/.08, R40 40/.06, R50 50/.05) finished with a Gold post-machining heat treatment; same dimensions and motor parameters as RC (per IFU spec table)
Reciprocating · Gold Heat-Treated NiTi
- Ncm
- File
- 3
- Verified
Specifications
Tap icons for term definitions
Reciprocating
| File | Tip | Taper | Motion | Role |
|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | ||||
How much the file widens per mm. Higher taper = more aggressive cutting. | ||||
R25red | 0.25 | 8% | Reciprocating | Shaping |
R40black | 0.40 | 6% | Reciprocating | Shaping |
R50yellow | 0.50 | 5% | Reciprocating | Shaping |
Clinical Tips
- IFU title "INSTRUCTION FOR USE — RC/RC GOLD/RC BLUE" is shared across all three metallurgy tiers; the IFU body text does not differentiate Gold-specific protocol parameters (per IFU)
- RC Gold uses the same published spec table dimensions and motor parameters as RC; the Gold post-machining heat treatment is a brand/packaging-level distinction not detailed in the IFU body
- Gold heat-treatment cyclic-fatigue-improvement claims come from product branding rather than the IFU text — exact figures are not independently verified
- IFU step 8 covers retreatment explicitly: the files are used with the same cutting action as in step ③ (per IFU step-by-step)
- Per IFU precautions, avoid continuous-rotation reaming on extremely curved canals; small-angle motions (filing, watch-winding, balanced force) are recommended for high-curvature cases (per IFU precautions)
Warnings
- Single-use; discard after each canal (per IFU section 3)
- Do not autoclave above 200 °C including drying phase (per IFU sterilization section)
- Do not fully immerse in NaOCl; only the working part may contact a max 5% NaOCl solution for up to 5 minutes (per IFU section 4)
- Inspect each file for distortion, unwinding, corrosion, or damaged edges before use (per IFU section 4)
- Use minimal apical pressure; never force the file (per IFU section 4)
- Contraindicated in patients with nickel allergy (per IFU section 1)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Protocol
01Glide Path1
02Shaping1
03Finishing1
Related Systems
Manufacturer page
Perfect Dental SystemsOther reciprocating systems
Motion category
Reciprocating MotionAlloy
Gold Heat TreatmentClinical guides
Frequently Asked Questions
What alloy is RC Gold made from?
What alloy is RC Gold made from?
Answer
RC Gold™ is manufactured from Gold Heat-Treated NiTi.
How many files are in the RC Gold sequence?
How many files are in the RC Gold sequence?
Answer
The RC Gold™ system includes 3 files: R25, R40, R50.
What is the RC Gold file sequence?
What is the RC Gold file sequence?
Answer
RC Gold™ offers these files: R25, R40, R50.
- One shaping file is selected per canal; the protocol section above shows the starting file.
What motion type does RC Gold use?
What motion type does RC Gold use?
Answer
RC Gold™ uses reciprocating motion.
What cases is RC Gold best for?
What cases is RC Gold best for?
Answer
RC Gold™ is best suited for: heat-treated reciprocating workflow, curved canals where fatigue resistance matters, practices preferring the gold-treated tier.
What speed and torque settings are recommended for RC Gold?
What speed and torque settings are recommended for RC Gold?
Answer
RC Gold™ uses reciprocating motion with manufacturer-specific motor settings (refer to official DFU for exact parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. RC Gold: sequence, speed and torque settings. EndoGuide. Updated: 2026-11-12. https://endo-guide.app/system/perfect-rc-gold
BibTeX
@misc{endoguide-perfect-rc-gold,
author = {Yüksel, Levent},
title = {RC Gold: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/perfect-rc-gold}},
year = {2026},
note = {EndoGuide. Updated: 2026-11-12}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.