T-Pro™
Perfect Dental (Shenzhen Perfect Medical Instruments)
T-Pro™
Perfect Dental (Shenzhen Perfect Medical Instruments)
Six-file premium sequence combining heat-treated rotary shapers (ST 30/.08, PG 17/.04, E1 20/.04, E2 25/.04) with pre-bendable finishers (E3 20/.06, E4 25/.06), with brand-cited 200% durability/efficiency improvement (per brochure)
Continuous Rotation · Mixed: Heat-Treated NiTi (ST/PG/E1/E2) + Pre-Bendable NiTi (E3/E4)
- Ncm1.5–3
- File
- 6
- Verified
Specifications
Tap icons for term definitions
| File | Tip | Taper | SpeedRPM | TorqueNcm | Role |
|---|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | |||||
How much the file widens per mm. Higher taper = more aggressive cutting. | |||||
Rotational speed (RPM). Follow manufacturer settings to prevent file breakage. | |||||
Rotational force limit (Ncm). Prevents file fracture by auto-reversing when resistance is too high. | |||||
ST 30/.08blue | 0.30 | 8% | Not specified in brochure spec table | 3.0 | Orifice opener |
PG 17/.04white | 0.17 | 4% | Not specified in brochure spec table | 3.0 | Glide path |
E1 20/.04yellow | 0.20 | 4% | Not specified in brochure spec table | 1.5 | Shaping |
E2 25/.04red | 0.25 | 4% | Not specified in brochure spec table | 1.5 | Shaping |
E3 20/.06yellow | 0.20 | 6% | Not specified in brochure spec table | 2.5 | Finishing |
E4 25/.06red | 0.25 | 6% | Not specified in brochure spec table | 2.5 | Finishing |
Clinical Tips
- Mixed alloy strategy: ST/PG/E1/E2 are heat-treated shapers; E3/E4 add pre-bendability for difficult access (per brochure)
- Brand cites a 200% improvement in durability, cutting efficiency, and fracture resistance vs competitor (per brochure marketing claim — not independently verified)
- Adapted S cross-section is described as supporting higher cutting efficiency and debris removal (per brochure)
- Maximum sterilization temperature: ≤134 °C (per brochure file table)
Warnings
- Single-canal use (a new file, discarded after the canal is treated) is advised when shaping extremely curved canals (per Perfect Dental IFU family precautions — T-Pro brochure has no dedicated IFU section)
- Do not autoclave above 200 °C including drying phase (per Perfect Dental IFU family precautions — T-Pro brochure has no dedicated IFU section)
- Do not fully immerse in NaOCl; only the working part may contact a max 5% NaOCl solution for up to 5 minutes (per Perfect Dental IFU family precautions — T-Pro brochure has no dedicated IFU section)
- Use minimal apical pressure; never force the file (per Perfect Dental IFU family precautions — T-Pro brochure has no dedicated IFU section)
- Inspect each file for distortion, unwinding, corrosion, or damaged edges before use (per Perfect Dental IFU family precautions — T-Pro brochure has no dedicated IFU section)
- Contraindicated in patients with nickel allergy (per Perfect Dental IFU family precautions — T-Pro brochure has no dedicated IFU section)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Protocol
01Glide Path4
02Shaping2
03Finishing1
Related Systems
From Perfect Dental Systems
Manufacturer page
Perfect Dental SystemsOther continuous rotation systems
Motion category
Continuous RotationCollections
Clinical guides
Frequently Asked Questions
What alloy is T-Pro made from?
What alloy is T-Pro made from?
Answer
T-Pro™ is manufactured from Mixed: Heat-Treated NiTi (ST/PG/E1/E2) + Pre-Bendable NiTi (E3/E4).
How many files are in the T-Pro sequence?
How many files are in the T-Pro sequence?
Answer
The T-Pro™ system includes 6 files: ST 30/.08, PG 17/.04, E1 20/.04, E2 25/.04, E3 20/.06, E4 25/.06.
What is the T-Pro file sequence?
What is the T-Pro file sequence?
Answer
T-Pro™ is used in this order: ST 30/.08 → PG 17/.04 → E1 20/.04 → E2 25/.04 → E3 20/.06 → E4 25/.06.
- Per-file speed, torque and technique are in the protocol section above.
What motion type does T-Pro use?
What motion type does T-Pro use?
Answer
T-Pro™ uses continuous rotation motion.
What cases is T-Pro best for?
What cases is T-Pro best for?
Answer
T-Pro™ is best suited for: premium full-sequence rotary shaping, curved canals where pre-bending matters, practices wanting a single brand to cover glide path through finishing.
What speed and torque settings are recommended for T-Pro?
What speed and torque settings are recommended for T-Pro?
Answer
Recommended settings: Not specified in brochure spec table and 3.0 / 1.5 / 2.5 Ncm across the file sequence (refer to official DFU for full per-file parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. T-Pro: sequence, speed and torque settings. EndoGuide. Updated: 2026-11-12. https://endo-guide.app/system/perfect-t-pro
BibTeX
@misc{endoguide-perfect-t-pro,
author = {Yüksel, Levent},
title = {T-Pro: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/perfect-t-pro}},
year = {2026},
note = {EndoGuide. Updated: 2026-11-12}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.