PX Wave™
Perfect Dental (Shenzhen Perfect Medical Instruments)
PX Wave™
Perfect Dental (Shenzhen Perfect Medical Instruments)
Single 15/.02 (ISO 015/.02) instrument at 300 rpm and 5.0 N·cm torque (per IFU spec table). Brand name "Wave" is consistent with a reciprocating instrument but the PX Wave IFU text does not explicitly call out reciprocating motion — motion type inferred from product family naming
Reciprocating · NiTi
- RPM
- Ncm5.0
- File
- 1
- Verified
Specifications
Tap icons for term definitions
Reciprocating
| File | Tip | Taper | Motion | Role |
|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | ||||
How much the file widens per mm. Higher taper = more aggressive cutting. | ||||
PX Wave 15/.02white | 0.15 | 2% | Reciprocating | Glide path |
Clinical Tips
- PX Wave spec card publishes only a single 15/.02 (ISO 015/.02) file at 300 rpm and 5.0 N·cm torque (per IFU)
- PX Wave IFU body text does NOT explicitly state "reciprocating" — the motion type is inferred from the brand name "Wave" and the file family. Verify motor mode and torque against the actual IFU symbol legend before use
- Torque value (5.0 N·cm) is unusually high for a 15/.02 NiTi file — verify motor compatibility and stay within manufacturer settings (per IFU spec table)
- PX Wave IFU step-by-step is brief: K-file scout (010/015), then PX Wave glide path "sequentially from small to large" (template phrasing), then check with corresponding files — no detailed peck schedule is published (per IFU section "STEP BY STEP INSTRUCTIONS")
Warnings
- Single-use; discard after each canal (per IFU section 3)
- Do not autoclave above 200 °C including drying (per IFU sterilization section)
- Do not fully immerse in NaOCl; only the working part may contact a max 5% NaOCl solution for up to 5 minutes (per IFU section 4)
- Use minimal apical pressure; never force the file (per IFU section 4)
- Inspect each file for distortion, unwinding, corrosion, or damaged edges before use (per IFU section 4)
- Contraindicated in patients with nickel allergy (per IFU section 1)
- Safety not established in pregnant/breastfeeding patients or children (per IFU section 4)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Protocol
01Glide Path1
02Shaping1
03Finishing1
Related Systems
Manufacturer page
Perfect Dental SystemsOther reciprocating systems
Motion category
Reciprocating MotionAlloy
Conventional NiTiClinical guides
Frequently Asked Questions
What alloy is PX Wave made from?
What alloy is PX Wave made from?
Answer
PX Wave™ is manufactured from NiTi with conventional heat treatment.
How many files are in the PX Wave sequence?
How many files are in the PX Wave sequence?
Answer
The PX Wave™ system includes 1 file: PX Wave 15/.02.
What motion type does PX Wave use?
What motion type does PX Wave use?
Answer
PX Wave™ uses reciprocating motion.
What cases is PX Wave best for?
What cases is PX Wave best for?
Answer
PX Wave™ is best suited for: single-file reciprocating glide path, narrow canals, value-tier reciprocating workflow.
What speed and torque settings are recommended for PX Wave?
What speed and torque settings are recommended for PX Wave?
Answer
PX Wave™ uses reciprocating motion with manufacturer-specific motor settings (refer to official DFU for exact parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. PX Wave: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/perfect-px-wave
BibTeX
@misc{endoguide-perfect-px-wave,
author = {Yüksel, Levent},
title = {PX Wave: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/perfect-px-wave}},
year = {2026},
note = {EndoGuide. Updated: 2026-10-03}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.