Reciproc® blue
VDW GmbH
Reciproc® blue
VDW GmbH
Single-file reciprocating system with increased flexibility vs original Reciproc (manufacturer reports 40%) and pre-bend memory
Reciprocating · M-Wire NiTi with Blue heat treatment
- ccw / cw
- File
- 3
- Verified
Specifications
Tap icons for term definitions
150° / 30°ccw / cw
| File | Tip | Taper | Motion |
|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | |||
How much the file widens per mm. Higher taper = more aggressive cutting. | |||
R25red | 0.25 | 8%v (regressive) | 150° / 30° |
R40black | 0.40 | 6%v (regressive) | 150° / 30° |
R50yellow | 0.50 | 5%v (regressive) | 150° / 30° |
Matching gutta-percha & paper points
- Gutta-percha
- Reciproc blue Gutta-Percha Master ConesR25, R40, R50
- Paper points
- Reciproc blue Paper PointsR25, R40, R50
Clinical Tips
- Increased flexibility vs original Reciproc — manufacturer reports ~40% improvement (product page FAQ; exact figure not independently verified)
- M-Wire NiTi base with innovative post-machining Blue heat treatment modifies molecular structure for increased cyclic fatigue resistance (per IFU / Scientific Manual)
- Can be pre-bent and will maintain shape during use — aids access in difficult cases (per step-by-step card)
- S-shaped cross-section with variable taper and non-cutting tip designed specifically for reciprocation (per brochure)
- One file shapes entire canal — R25 for most cases, no instrument changes during preparation (per brochure)
- R25 can initiate shaping without prior glide path in most cases, but ISO #10 scouting to WL and glide path to ISO #15 may still be needed if scout file must be pre-bent or cannot reach length (per IFU/brochure)
- If file does not progress, stop and reassess — do not force; clean flutes, irrigate, recapitulate (per IFU)
- Handle is non-autoclavable — safety feature to prevent reuse and metal fatigue from over-use (per brochure)
- Files may appear slightly curved from manufacturing — normal, not a defect; no need to straighten (per 2024 IFU Section 5)
- For extremely curved canals, use file for single canal only to reduce breakage risk (per 2024 IFU Section 7.2)
- Also suitable for retreatment — R25 removes gutta-percha and carrier-based fillings; use brushing motion against lateral walls (per 2024 IFU Section 8.2)
Warnings
- Single use only — do not reprocess or reuse; for extremely curved canals, use file for one canal only (per 2024 IFU)
- Use only with reciprocating motion (RECIPROC ALL mode) — never continuous rotation
- Contains nickel — do not use on patients with known nickel allergy
- Do not fully immerse in NaOCl — only working part in max 5% concentration (per 2024 IFU Section 7.2)
- Do not use in canals with abrupt apical curvature — use pre-curved hand files instead (per 2024 IFU Section 7.1)
- Inspect for distortion, untwisting, unwinding, corrosion, or damaged cutting edges before each use — discard if defects noted (per 2024 IFU Section 7.2)
- Never force file down canal — always use minimal apical pressure (per 2024 IFU Section 7.2)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
References
Protocol
01Glide Path2
02Shaping1
03Finishing2
Related Systems
From VDW Systems
Manufacturer page
VDW SystemsOther reciprocating systems
Motion category
Reciprocating MotionComparisons
Reciproc BluevsE-Flex GoldReciproc BluevsEdgeOne FireReciproc BluevsEndoArt ActionReciproc BluevsEndoArt ExpertReciproc BluevsHyFlex CMReciproc BluevsHyFlex EDMReciproc BluevsMtwoReciproc BluevsNIC V BlueReciproc BluevsOne RECIReciproc BluevsRC BlueReciproc BluevsProTaper GoldReciproc BluevsProTaper NextReciproc BluevsProTaper UltimateReciproc BluevsR-MotionReciproc BluevsRECIPROCReciproc BluevsTF AdaptiveReciproc BluevsTruNatomyReciproc BluevsVDW.ROTATEReciproc BluevsVortex BlueReciproc BluevsWaveOne GoldReciproc BluevsXP-endo ShaperReciproc BluevsZenFlex
Alloy
Blue Heat TreatmentUse cases
Clinical guides
Frequently Asked Questions
What alloy is Reciproc Blue made from?
What alloy is Reciproc Blue made from?
Answer
Reciproc® blue is manufactured from M-Wire NiTi with Blue heat treatment.
How many files are in the Reciproc Blue sequence?
How many files are in the Reciproc Blue sequence?
Answer
The Reciproc® blue system includes 3 files: R25, R40, R50.
What is the Reciproc Blue file sequence?
What is the Reciproc Blue file sequence?
Answer
Reciproc® blue offers these files: R25, R40, R50.
- One shaping file is selected per canal according to the DFU; the protocol section above shows the starting file.
What motion type does Reciproc Blue use?
What motion type does Reciproc Blue use?
Answer
Reciproc® blue uses reciprocating motion.
What cases is Reciproc Blue best for?
What cases is Reciproc Blue best for?
Answer
Reciproc® blue is best suited for: severely curved canals, cases needing a flexible reciprocating file, pre-bendable files.
What speed and torque settings are recommended for Reciproc Blue?
What speed and torque settings are recommended for Reciproc Blue?
Answer
Reciproc® blue uses reciprocating motion with manufacturer-specific motor settings (refer to official DFU for exact parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. Reciproc Blue: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/reciproc-blue
BibTeX
@misc{endoguide-reciproc-blue,
author = {Yüksel, Levent},
title = {Reciproc Blue: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/reciproc-blue}},
year = {2026},
note = {EndoGuide. Updated: 2026-10-03}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.