EdgeOne Fire™
EdgeEndo
EdgeOne Fire™
EdgeEndo
FireWire heat treatment with enhanced cyclic fatigue resistance and WaveOne-compatible motor settings (manufacturer bench data)
Reciprocating · FireWire™ Heat-Treated NiTi
- ccw / cw
- File
- 5
- Verified
Specifications
Tap icons for term definitions
150° / 30°ccw / cw
| File | Tip | Taper | Motion | Role |
|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | ||||
How much the file widens per mm. Higher taper = more aggressive cutting. | ||||
GlidePathwhite | 0.19 | 2-6% (progressive) | 150° / 30° | Glide path |
Smallyellow | 0.20 | variable | 150° / 30° | Shaping |
Primaryred | 0.25 | variable | 150° / 30° | Shaping |
Mediumgreen | 0.35 | variable | 150° / 30° | Finishing |
Largewhite | 0.45 | variable | 150° / 30° | Finishing |
Matching gutta-percha & paper points
- Gutta-percha
- EdgeEndo EdgeOne Fire GP PointsSmall, Primary, Medium, Large
- Paper points
- EdgeEndo EdgeOne Fire Paper PointsSmall, Primary, Medium, Large
Clinical Tips
- ALWAYS start with PRIMARY file per DFU — do not pre-select sizes; use SMALL only if PRIMARY does not progress
- Compatible with WaveOne motor settings; 2025 tip card also lists Edge HP presets A/B/C and 350 RPM / 4.0-5.2 Ncm fallback
- FireWire heat treatment may provide improved cyclic fatigue resistance vs Gold-treated NiTi — Gambarini 2019 (PMID 31516658) found ~2x in Medium files at 90°/2mm in vitro (bench data, specific test conditions)
- Reciprocating motion reduces cyclic fatigue accumulation vs continuous rotation
- Single-file system reduces cross-contamination risk — delivered sterile, single-use
- Files may appear slightly curved — this is normal, not a defect; they follow canal anatomy once inside
- EdgeCore carrier-based obturation system available as matching accessory
Warnings
- Must use reciprocating motor settings — WaveOne-compatible mode or Edge HP presets A/B/C (per 2025 tip card); never continuous rotation
- Single use only - cannot be resterilized or reused
- Contains nickel - do not use on patients with nickel allergy
- Do not use in canals with very severe or sudden apical curvatures
- Wipe the flutes clean often and inspect the file for unwinding or wear
- If a file does not easily progress, remove and inspect before re-inserting
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
References
Protocol
01Glide Path2
02Shaping4
03Finishing2
Related Systems
From EdgeEndo Systems
Manufacturer page
EdgeEndo SystemsOther reciprocating systems
Motion category
Reciprocating MotionComparisons
Collections
Clinical guides
Frequently Asked Questions
What alloy is EdgeOne Fire made from?
What alloy is EdgeOne Fire made from?
Answer
EdgeOne Fire™ is manufactured from FireWire™ Heat-Treated NiTi.
How many files are in the EdgeOne Fire sequence?
How many files are in the EdgeOne Fire sequence?
Answer
The EdgeOne Fire™ system includes 5 files: GlidePath, Small, Primary, Medium, Large.
What is the EdgeOne Fire file sequence?
What is the EdgeOne Fire file sequence?
Answer
EdgeOne Fire™ offers these files: GlidePath, Small, Primary, Medium, Large.
- One shaping file is selected per canal according to the DFU; the protocol section above shows the starting file.
What motion type does EdgeOne Fire use?
What motion type does EdgeOne Fire use?
Answer
EdgeOne Fire™ uses reciprocating motion.
What cases is EdgeOne Fire best for?
What cases is EdgeOne Fire best for?
Answer
EdgeOne Fire™ is best suited for: WaveOne Gold alternative with enhanced fatigue resistance, single-file reciprocating efficiency, reduced cross-contamination.
What speed and torque settings are recommended for EdgeOne Fire?
What speed and torque settings are recommended for EdgeOne Fire?
Answer
EdgeOne Fire™ uses reciprocating motion with manufacturer-specific motor settings (refer to official DFU for exact parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. EdgeOne Fire: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/edgeone-fire
BibTeX
@misc{endoguide-edgeone-fire,
author = {Yüksel, Levent},
title = {EdgeOne Fire: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/edgeone-fire}},
year = {2026},
note = {EndoGuide. Updated: 2026-10-03}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.