Vortex Blue®
Dentsply Sirona
Vortex Blue®
Dentsply Sirona
Blue heat treatment provides min 65% better cyclic fatigue resistance vs M-Wire NiTi and at least 42% higher peak torque strength (manufacturer data)
Continuous Rotation · Blue Heat-Treated NiTi
- RPM
- g-cm75–368
- File
- 16
- Verified
Specifications
Tap icons for term definitions
| File | Tip | Taper | SpeedRPM | Torqueg-cm | Role |
|---|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | |||||
How much the file widens per mm. Higher taper = more aggressive cutting. | |||||
Rotational speed (RPM). Follow manufacturer settings to prevent file breakage. | |||||
Rotational force limit (Ncm). Prevents file fracture by auto-reversing when resistance is too high. | |||||
15/.04white | 0.15 | 4% | 500 | 75 | Shaping |
20/.04yellow | 0.20 | 4% | 500 | 75 | Shaping |
25/.04red | 0.25 | 4% | 500 | 104 | Shaping |
30/.04blue | 0.30 | 4% | 500 | 104 | Shaping |
35/.04green | 0.35 | 4% | 500 | 132 | Shaping |
40/.04black | 0.40 | 4% | 500 | 132 | Shaping |
45/.04white | 0.45 | 4% | 500 | 132 | Shaping |
50/.04yellow | 0.50 | 4% | 500 | 132 | Shaping |
15/.06white | 0.15 | 6% | 500 | 195 | Shaping |
20/.06yellow | 0.20 | 6% | 500 | 195 | Shaping |
25/.06red | 0.25 | 6% | 500 | 290 | Shaping |
30/.06blue | 0.30 | 6% | 500 | 290 | Shaping |
35/.06green | 0.35 | 6% | 500 | 368 | Shaping |
40/.06black | 0.40 | 6% | 500 | 368 | Shaping |
45/.06white | 0.45 | 6% | 500 | 368 | Shaping |
50/.06yellow | 0.50 | 6% | 500 | 368 | Shaping |
Matching gutta-percha & paper points
- Gutta-percha
- Dentsply Sirona Vortex Blue Conform Fit Gutta-Percha Points15/.04, 20/.04, 25/.04, 30/.04, 35/.04, 40/.04, 45/.04, 50/.04, 15/.06, 20/.06, 25/.06, 30/.06, 35/.06, 40/.06, 45/.06, 50/.06
- Paper points
- Dentsply Sirona Vortex Absorbent Paper Points.04 taper series, .06 taper series
Clinical Tips
- All files use 500 RPM — no speed changes between files
- Crown-down technique: start with larger file, reduce size if resistance is met
- .04 taper recommended for moderate to severe curvatures past mid-root
- .06 taper for coronal portions of mild to moderate curvatures
- Recapitulate with #10 or #15 K-file between each rotary file
- Non-cutting tip design reduces risk of ledging and perforation
- Patented variable helical angle design (same as ProFile Vortex) — enhances cutting efficiency and reduces thread-in
- Convex triangular cross-section enhances cutting action while decreasing rotational friction
- Full range available: sizes 15-50 in both .04 and .06 tapers (16 SKUs total)
- Matching Vortex obturators, Conform Fit GP points, and paper points available
- Manufacturer reports min 65% improvement in cyclic fatigue over M-Wire NiTi (bench data, per current brochure)
- Manufacturer reports min 99% improvement in cyclic fatigue resistance over standard NiTi, up to 353% (bench data, per current product page)
- Manufacturer reports at least 42% higher peak torque vs M-Wire NiTi, up to 126% (bench data)
- Files may appear slightly curved from heat treatment — this is not a defect; files follow canal anatomy once inside
Warnings
- Single use only — provided sterile, cannot be resterilized or reused
- Contains nickel — do not use on patients with nickel allergy
- Always use minimal apical pressure — do not force files
- Each file goes to length once only and stays there no longer than 1 second
- Exercise caution in the apical area and around significant curvatures
- Wipe the flutes often while you work and look for distortion or wear (per DFU)
- Do not choose overly large files for the canal anatomy
- If a file does not easily progress, remove and use a smaller file first
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Protocol
01Glide Path2
02Shaping2
03Finishing2
Related Systems
From Dentsply Sirona Systems
Manufacturer page
Dentsply Sirona SystemsOther continuous rotation systems
Motion category
Continuous RotationComparisons
Alloy
Blue Heat TreatmentClinical guides
Frequently Asked Questions
What alloy is Vortex Blue made from?
What alloy is Vortex Blue made from?
Answer
Vortex Blue® is manufactured from Blue Heat-Treated NiTi.
How many files are in the Vortex Blue sequence?
How many files are in the Vortex Blue sequence?
Answer
The Vortex Blue® system includes 16 files: 15/.04, 20/.04, 25/.04, 30/.04, 35/.04, 40/.04, 45/.04, 50/.04, 15/.06, 20/.06, 25/.06, 30/.06, 35/.06, 40/.06, 45/.06, 50/.06.
What is the Vortex Blue file sequence?
What is the Vortex Blue file sequence?
Answer
Vortex Blue has no fixed file-by-file sequence: the DFU describes a crown-down approach chosen by canal size.
- Small canals start with 30/.04 and, if resistance is met, drop to 25/.04, 20/.04 or 15/.04 before returning to the larger file; large canals start with 40/.04 and step down to 30/.04 or 25/.04 the same way. .06 tapers are used coronally in mild to moderate curves and .04 tapers past mid-root in more curved canals.
- The protocol section above carries the per-step details.
What motion type does Vortex Blue use?
What motion type does Vortex Blue use?
Answer
Vortex Blue® uses continuous rotation motion.
What cases is Vortex Blue best for?
What cases is Vortex Blue best for?
Answer
Vortex Blue® is best suited for: crown-down versatility with dual taper options, wide size range from 15-50, balanced fatigue resistance and torque strength.
What speed and torque settings are recommended for Vortex Blue?
What speed and torque settings are recommended for Vortex Blue?
Answer
Recommended settings: 500 RPM and 75 / 104 / 132 / 195 / 290 / 368 g-cm across the file sequence (refer to official DFU for full per-file parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. Vortex Blue: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/vortex-blue
BibTeX
@misc{endoguide-vortex-blue,
author = {Yüksel, Levent},
title = {Vortex Blue: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/vortex-blue}},
year = {2026},
note = {EndoGuide. Updated: 2026-10-03}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.