EndoArt® Touch

İnci Dental (Turkey)

Continuous Rotation

COURSES29 November 2026 · İstanbul · Canal shaping course

EndoArt® Touch

İnci Dental (Turkey)

Fixed 06 taper system available in Gold and Blue heat treatment lines for predictable shaping

Continuous Rotation · Gold/Blue Heat-Treated NiTi

300
RPM
1.5–3.5
Ncm

File: 19
Verified: Jul 2026

Specifications

Tap icons for term definitions

File	Tip	Taper	SpeedRPM	TorqueNcm
Diameter at the file tip (D0). Larger tips shape wider canals.
How much the file widens per mm. Higher taper = more aggressive cutting.
Rotational speed (RPM). Follow manufacturer settings to prevent file breakage.
Rotational force limit (Ncm). Prevents file fracture by auto-reversing when resistance is too high.
Orifice Opener	0.19	8%	300	3.5
Touch Gold
10/06purple	0.10	6%	300	2.0
15/06white	0.15	6%	300	2.2
20/06yellow	0.20	6%	300	2.5
25/06red	0.25	6%	300	2.5
30/06blue	0.30	6%	300	2.5
35/06green	0.35	6%	300	2.5
40/06black	0.40	6%	300	2.5
45/06white	0.45	6%	300	2.5
50/06yellow	0.50	6%	300	2.5
Touch Blue
10/06purple	0.10	6%	300	1.5
15/06white	0.15	6%	300	1.5
20/06yellow	0.20	6%	300	2.5
25/06red	0.25	6%	300	2.5
30/06blue	0.30	6%	300	2.5
35/06green	0.35	6%	300	2.5
40/06black	0.40	6%	300	2.5
45/06white	0.45	6%	300	2.5
50/06yellow	0.50	6%	300	2.5

Motor settings for every system

Clinical Tips

Touch Gold: Premium 6% taper files with gold heat treatment offering exceptional flexibility, strength, and fatigue resistance with an innovative cutting design for smooth navigation
Touch Blue: 6% taper files with blue heat treatment offering superior precision, controlled memory for pre-bending, and effective debris removal for optimal shaping
Gold heat treatment: 2x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)
Blue heat treatment: 4x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)
Blue files can be pre-bent before canal entry due to controlled memory
Fixed 6% taper provides predictable and consistent canal preparation
Touch Gold torque: 300 RPM, 2.0 Ncm (10/06), 2.2 Ncm (15/06), 2.5 Ncm (20/06–50/06)
Touch Blue torque: 300 RPM, 1.5 Ncm (10/06–15/06), 2.5 Ncm (20/06–50/06)
Orifice Opener (19/08): 300 RPM, 3.5 Ncm
Autoclavable box per product pages — reuse/sterilization protocol not established in catalog; contact manufacturer for reprocessing instructions

Warnings

Inspect for distortion or deformation before each use — discard if defective
Reuse and sterilization protocol not established in publicly available catalog — verify with manufacturer

Obturation Techniques

Single cone, warm vertical, carrier-based & lateral compaction

Protocol

01Glide Path2

02Shaping2

03Finishing1

Related Systems

From Inci Dental (Turkey) Systems

EndoArt Action EndoArt Smart EndoArt Expert

Manufacturer page

Inci Dental (Turkey) Systems

Other continuous rotation systems

ProTaper Gold ProTaper Ultimate ProTaper Next

Motion category

Continuous Rotation

Comparisons

EndoArt TouchvsProTaper Gold EndoArt TouchvsWaveOne Gold

Alloy

Gold Heat Treatment

Use cases

Narrow Canals Wide Canals Mild Curvature Moderate Curvature

Collections

Gold Heat Treatment Rotary Systems EndoArt Systems

Clinical guides

Canal Preparation Irrigation Obturation Complications

Frequently Asked Questions

What alloy is EndoArt Touch made from?

Answer

EndoArt® Touch is manufactured from Gold/Blue Heat-Treated NiTi.

How many files are in the EndoArt Touch sequence?

Answer

The EndoArt® Touch system includes 19 files: Orifice Opener, 10/06, 15/06, 20/06, 25/06, 30/06, 35/06, 40/06, 45/06, 50/06, 10/06, 15/06, 20/06, 25/06, 30/06, 35/06, 40/06, 45/06, 50/06.

What is the EndoArt Touch file sequence?

Answer

EndoArt® Touch is used in this order: Orifice Opener → 10/06 → 15/06 → 20/06 → 25/06 → 30/06 → 35/06 → 40/06 → 45/06 → 50/06.

Per-file speed, torque and technique are in the protocol section above.

What motion type does EndoArt Touch use?

Answer

EndoArt® Touch uses continuous rotation motion.

What cases is EndoArt Touch best for?

Answer

EndoArt® Touch is best suited for: fixed 6% taper, predictable preparation, standard cases.

What speed and torque settings are recommended for EndoArt Touch?

Answer

Recommended settings: 300 RPM and 3.5 / 2.0 / 2.2 / 2.5 / 1.5 Ncm across the file sequence (refer to official DFU for full per-file parameters).

See something wrong? Report it

Reviewed by

Uzm. Dt. Levent Yüksel

DDS · Endodontist

Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.

About the author Editorial policy Clinical profile

Cite this page

Citation formats for the manufacturer-verified specification data on this page.

AMA

Yüksel L. EndoArt Touch: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/endoart-touch

BibTeX

@misc{endoguide-endoart-touch,
  author = {Yüksel, Levent},
  title = {EndoArt Touch: sequence, speed and torque settings},
  howpublished = {\url{https://endo-guide.app/system/endoart-touch}},
  year = {2026},
  note = {EndoGuide. Updated: 2026-10-03}
}

@endoguideapp

Independent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.

Checklist

File	Tip	Taper	SpeedRPM	TorqueNcm
Orifice Opener	0.19	8%	300	3.5
Touch Gold
10/06purple	0.10	6%	300	2.0
15/06white	0.15	6%	300	2.2
20/06yellow	0.20	6%	300	2.5
25/06red	0.25	6%	300	2.5
30/06blue	0.30	6%	300	2.5
35/06green	0.35	6%	300	2.5
40/06black	0.40	6%	300	2.5
45/06white	0.45	6%	300	2.5
50/06yellow	0.50	6%	300	2.5
Touch Blue
10/06purple	0.10	6%	300	1.5
15/06white	0.15	6%	300	1.5
20/06yellow	0.20	6%	300	2.5
25/06red	0.25	6%	300	2.5
30/06blue	0.30	6%	300	2.5
35/06green	0.35	6%	300	2.5
40/06black	0.40	6%	300	2.5
45/06white	0.45	6%	300	2.5
50/06yellow	0.50	6%	300	2.5

File

Tip

Taper

SpeedRPM

TorqueNcm

Orifice Opener

0.19

300

3.5

Touch Gold

10/06purple

0.10

300

2.0

15/06white

0.15

300

2.2

20/06yellow

0.20

300

2.5

25/06red

0.25

300

2.5

30/06blue

0.30

300

2.5

35/06green

0.35

300

2.5

40/06black

0.40

300

2.5

45/06white

0.45

300

2.5

50/06yellow

0.50

300

2.5

Touch Blue

10/06purple

0.10

300

1.5

15/06white

0.15

300

1.5

20/06yellow

0.20

300

2.5

25/06red

0.25

300

2.5

30/06blue

0.30

300

2.5

35/06green

0.35

300

2.5

40/06black

0.40

300

2.5

45/06white

0.45

300

2.5

50/06yellow

0.50

300

2.5

@misc{endoguide-endoart-touch, author = {Yüksel, Levent}, title = {EndoArt Touch: sequence, speed and torque settings}, howpublished = {\url{https://endo-guide.app/system/endoart-touch}}, year = {2026}, note = {EndoGuide. Updated: 2026-10-03} }